Tomato squeezers tomato masher juice extractors
Tomato squeezers tomato masher juice extractors manual and electric juice extractors of various powers and sizes, with and without feeder.
ElettroWebStore offers its customers a wide range of electric tomato squeezers, mainly from the Reber brand and the Artus brand.
Lo tomatoes squeezer is also called tomatoes squeezer. In fact, it is a device used to transform fresh tomatoes into tomato puree by separating the pulp from the skin and seeds.
Typical operation of a tomato press
- Preparing tomatoestomatoes must be washed and cut into pieces. It is preferable to blanch them briefly to facilitate removal of the skin.
- Insertion into the body of the tomato squeezerThe tomato pieces are placed in the funnel of the tomato processor and pressed inside with the pestle provided.
- Manual or electrical actionThe tomato-pressing machine can be operated manually via a crank handle or electrically. The applied force pushes the tomatoes through a fine-mesh filter.
- Separation of componentsThe tomato pulp passes through the filter and is collected in a container, while the skins and seeds are separated and discarded.
Types of tomato squeezers
Manualsideal for small quantities of tomatoes. They are economical and easy to use. They can be equipped with a stainless steel funnel and chute or with a moplen (i.e. plastic suitable for food contact) funnel and chute. Both models, however, have a painted cast iron body suitable for food contact, acetal resin propeller and crank handle.
Electrics: suitable for large quantities of tomatoes, they are faster and require less effort. They can have low and even high prices, depending on the quality of the products, the capacity of use, the power of the motor, etc.
Recommendations for Use
- Choose ripe tomatoesUse well-ripened tomatoes to obtain a sweeter, thicker purée.
- CleaningClean the tomato press thoroughly after each use to avoid residues that could cause hygiene problems or damage the pressing machine.
- Storage of tomato pureeStore tomato puree in sterilised jars to maintain freshness and extend its shelf life. The jars and bottles to be used must be washed before use, and sterilised if possible. NEVER use unwashed cans and bottles, even if they have just been purchased in packages. In fact, products in parcels are neither washed nor cleaned. The original parcel is only for transport and shipping!
- Useful accessoriesIt is possible to buy filters with larger or smaller holes separately to turn the device into a machine for making juices or jams.
Juice extractors and masher. It is possible to attach the vegetable chopper or juice extractor accessory to the motor of the juicer to make your juicer even more useful.
Maintenance
The electric tomato squeezers require no special maintenanceother than proper cleaning of moving and food-contact parts.
No lubricating oil should be added to electric motors, unless there have been leaks.
Tomato squeezers with smaller engines must NOT be used continuously for more than 15 minutes. The correct instructions can be found in the manual for each model.
I resin bodies must be mounted carefully, taking care that the spring-loaded drive pin and the squeezer propeller are perfectly aligned. Otherwise the heat risks melting the body.
I cast iron bodies painted at 220 degrees centigrade for pressing and suitable for contact with foodstuffs must be washed well and care must be taken not to have them scratched on the inside. If some of the paint comes off, the body should be changed or an attempt should be made to restore the enamel that has been removed.
Tomato Squeezer No. 3 and No. 5
The range starts with the No. 3 electric tomato squeezers, which have a smaller body. They are ideal for limited tomato sauce production. The No.3 codes are: 9008N, 9008NE, 10900N for electrical products. For manual products you must choose the codes
The No. 5 tomato passes, on the other hand, are the largest ones, with motors ranging from 500 watts to 1200 watts. In this case we are talking about the 9004N, 9000N, 9000NPSP.
There is also a tomato squeezer model with a 450 watt motor and tomato squeezer attachment No. 5. This is code 10200N
In addition, tomato squeezer accessories can also be purchased separately as optional tomato squeezers.
We also have the tomato press with incorporated feeder. They are very practical products for production needs in poorly equipped areas.
Spare parts and accessories for tomato squeezers tomato masher juice extractors
ElettroWebStore also offers all necessary accessories and spare parts. You will be able to find the parts you need to repair and maintain your Reber tomato squeezer, perhaps purchased a few years ago!
All tomato squeezers can be purchased with either plastic or stainless steel accessories.
In addition, tomato squeezer accessories can also be purchased separately as optional tomato squeezers.
Winged version or fairing version?
This product is a finned version. What does this mean? It means that the engine in the photo is not covered by any fairing, i.e. by any component that protects it from the outside. It is also fitted with a fan cover, i.e. the plastic rear part that covers the fan that cools the engine.
ElettroWebStore also has Reber motors with fairing, possibly with all-steel gears. These motors are better because, in addition to having stronger gears, they do not have a plastic fan cover but have the entire motor body covered by a practical stainless steel casing. Contact us for a customised quote!
Differences between engine wattage and engine HP horsepower
The power of REBER motors is typically expressed in watts. The wattage of the motors generally indicates the amount of power in Watts that the motor absorbs from the electrical system. Multiplying this instant value by the hours gives the current absorption in Watts/hour.
Conversely, the expression of power in HP, i.e. motor horsepower, indicates how much power motors are able to transform into work. The greater the power absorbed from the mains into work, the greater the motor's power. In fact, many motors, while absorbing a lot of power from the mains, are not very powerful. This is because they absorb energy but do not transform it into work, but rather dissipate it, typically in heat and internal rotor rotation useless for the application they are designed for.
REBER No.5 motors, in fact, have a 4-pole electrical winding and make half as many revolutions per minute (1400) as many competitors. This implies that, for the same absorbed current (500 watts), the REBER motor has a better output. In fact, it transforms more energy into work, dispersing less of it in heat.
Painted cast iron body, not plastic
The body of the REBER 9004N is made entirely of cast iron, not plastic. Cast iron, of course, takes the strain much better. It is harder and less deformable. Inside, the body is painted with high-temperature baked epoxy paint. This ensures that the paint can withstand more abrasion, adhering better to the cast iron.
The paints used, unlike cheaper products of other brands, are certified to be suitable for food contact.
Acetal resin inner propeller, not aluminium or cast iron
The internal propeller of REBER Electric Tomato Squeezer No. 5 HP 0.40 500 Watt 9004N is made entirely of acetal resin, i.e. a plastic material suitable for contact with foodstuffs. In fact, this material guarantees perfect resistance to the acids typically contained in tomatoes and sauces. In contrast, materials such as cast iron and aluminium do not have these properties. They, in fact, release ferrous substances to the sauces. For this reason, it is important not to buy substandard products or products that do not also have these properties.
Accessories made entirely of 18/10 AISI 304 stainless steel
The other accessories of the REBER 9004N tomato squeezer are made entirely of 18/10 AISI 304 stainless steel. This guarantees excellent food contact properties and high durability. It also lends a sense of quality and professionalism to the product. We are talking in particular about the following parts, which are also available as spare parts:
- filter cone (also available on request with smaller holes of 1.1 millimetres and with larger 2.5 mm holes)
- funnel
- splash guard
- chute
Red cap and black cap on the engine: should they be changed or not?
For those who have been familiar with REBER tomato squeezer engines for some time, you will be faced with the Hamletic question: should the red motor cap be changed or not? Why is the black ventilation cap no longer included? How do I carry out the replacement that used to have to be done?
This simple question is now answered: the red cap no longer needs to be changed! And why is it no longer changed? Simply because the black plug that came with it was a plug with a breather. It had to be replaced with the red cap because the lubricated oil contained in the flange and greasing the gears tended to expand and produce small amounts of fumes. This, in the past, created an increase in pressure inside the engine and could create problems.
Well, today all these problems are gone because theREBER engine gear lubricating oil has been replaced with an oil that no longer produces these problems. Therefore, the red cap that only served to close the flange and prevent oil from escaping during transport no longer needs to be replaced!
EN 
IT 
DE 
FR 
ES