Arizona bioclimatic aluminium pergola 3×3 3×4 3×6 anthracite white

Arizona bioclimatic aluminium pergola 3×3 3×4 3×6 anthracite white

Arizona bioclimatic aluminium pergola 3×3 3×4 3×6 anthracite white, various colours and sizes.

This product consists of a pergola gazebo of the bioclimatic type, i.e. with adjustable slats to filter the sun. The entire structure is open at the sides, although light grey textilene blackout blinds with self-retracting rollers can be purchased separately.

For more information on outdoor furniture products, warranty, voluminous deliveries, visit this page.

The following dimensions are available:

• 3×3 metres
• 3×4 metres
• 3×6 metres

The colours available in the catalogue are:

• white
• anthracite

Colours and sizes may vary without notice. Availability may vary without notice.

The useful interior height is 260 centimetres. This feature particularly differentiates the Arizona bioclimatic pergola from competitor models. The greater usable height allows more light than other products. In addition, the poles are higher and, therefore, the overall weight of the product is greater.

Compared to important competitor products, the poles of this bioclimatic gazebo pergola are of a larger section and size. In fact, the aluminium support pillars have dimensions of 111×111 millimetres, over one centimetre more than the competition. These features make the Arizona Greenwood bioclimatic pergola by Moia S.p.a. a product of greater consistency and sturdiness. The poles are equipped with an integrated rainwater drainage system

The rafters or transoms of the roof are adjustable via a single external crank. The dimensions are: 140×75 mm - 173×30 mm.

All the components of this bioclimatic gazebo pergola, except the hardware, are made of aluminium. This avoids any rust spots that may originate from the structure, unlike iron ones.

Aspects to pay particular attention to before purchasing the Arizona bioclimatic aluminium pergola gazebo 3×3 3×4 3×6 white anthracite

The product is supplied in kit form. The GAZ510G pergola is assembled by the customer. All the necessary hardware is included in the package. Should any small parts be missing (this can happen rarely), they can be easily found in hardware shops.

The aluminium frame of this product provides good weather resistance. Our experience, however, leads us to recommend paying attention to the supplied hardware (screws and bolts). If you see rust spots, you should replace the screws and bolts by buying the equivalent from any hardware store. We recommend purchasing Italian stainless steel hardware.

The product is particularly heavy and is delivered in 4 or 5 different boxes. It is delivered only at street level, on roads accessible by truck.

There is no porterage service on the floor or pulling service on the floor, which are entirely the responsibility of the Customer.

It is advisable to be equipped and experienced in DIY work as the product is particularly bulky and the parts can be heavy to handle. We accept no liability in case of problems.

A product for domestic use for which no special technical sealing or load certificates are required.

The weathertightness of the roof is not guaranteed. Over time, the slat seals may lose their rainwater sealing properties and rainwater may percolate. It is not a waterproof product.

Technical specifications

• Square pergola 300×300 cm, or rectangular 300×400 cm, or 300×600 cm
• Overall height at highest point: 260 centimetres
• Lamellar roof adjustable by crank
• Aluminium frame 111×111 mm
• Water drainage system integrated in the posts
• Made in China