Reber Artus electric tomato squeezer 450 Watt 9008NE USED RECONDITIONED
Reber Artus electric tomato squeezer 450 Watt 9008NE USED RINCONDITIONED is a powerful tomato press with plastic accessories and 18/10 stainless steel filter cone. An extended warranty for a further 3 years is available!
This is a used and reconditioned tomato squeezer, with an acetal resin body and propeller replaced. The tomato squeezer has been tested and works perfectly, and the accessories have been cleaned. However, there are obvious signs of yellowing, due to use and contact with the tomato, in the pestle and the nylon component of the drive pin. The filter cone has traces of contact with the tomato in the welds. The plastic funnel also has slight scratches on the inner surface.
All cosmetic defects listed in no way affect the proper functioning of the tomato squeezer, which is sold as used and reconditioned. We will therefore not accept product returns due to the presence of the cosmetic defects listed.
only 1 piece available! Please do not hesitate to contact us for any further information!
The funnel and chute are made of moplen, which is a plastic material suitable for food contact. The body of this electric tomatoes squeezer is made of acetal resin suitable for food contact. The motor is finned, with visible fins. The entire finish of the 9008NE electric tomato squeezer is red.
Technical specifications
- Electric tomatoes squeezer USED RECONDITIONED
- Finned motor with plastic fan cover
- Electric induction motor, continuous duty, protection class: IPX5
- Axial gearbox with nylon and metal gears in oil bath
- Long-life oil, suitable for incidental food contact (no topping up or replacement required)
- Engine power: 0.30 HP
- Power consumption: 450 Watts
- The engine is equipped with a forward gear only.
- Weight: 8.8 kg
- Measurements in cm: 50x28x34 (h)
- Filter cone, drip tray, large capacity funnel made entirely of food-grade plastic
- It is not equipped with a splash guard
- Acetal resin body, suitable for food contact
- High-strength acetal resin propeller (over 220 °C), specific for food contact
- Steel and nylon 6.6 tow pin
- Applicable accessories on request: grater, meat grinder, pasta press, kneading machine
- Article certified for food use that fully complies with Italian and European regulations on household appliances
- Continuous use limited to 20 minutes + 10 minutes resting timein a dry, level place and not in contact with moisture. Prolonged use over a longer period of time may result in deformation of the resin body, not covered by warranty.
Description
Reber Artus electric tomato squeezer 450 Watt 9008NE USED RECONDITIONED is a tomato press of good quality and power.
In fact, it consists of a 450 watt motor that generates 0.30 horsepower. This allows the machine to be used to make good homemade tomato puree without any problems. In fact, the REBER 9008NE tomato puree machine performs at its best in domestic operation.
Consequently, thanks to its power, this product is also ideal for use as a meat grinder, grater, kneader and pasta press. The motor of the REBER 9008NE can be used with both stainless steel and tin-plated cast-iron mincing accessories of sizes No. 5 and No. 8. In fact, for use with larger mincers, we recommend more powerful motors!
In addition to being used as a tomato press, this product can also easily be used to make jam. In this case, it may be useful to purchase filter cones with smaller or larger holes than the one supplied (depending on the type of recipe to be made).
All types of mincing accessories applicable on REBER motors are available in the ElettroWebStore!
For more information on the product's characteristics and how to use it, please read the user and maintenance manual included in the package.
Special notes on REBER ARTUS Electric Tomatoes Squeezer 450 Watt 9008NE USED RECONDITIONED
The body of this REBER ARTUS Electric tomato squeezer No. 3 HP 0.30 450 Watt plastic accessories 9008NE is a plastic derivative, it is not made of cast iron. Special care must therefore be taken when assembling the body and auger. It must be avoided that the auger and drive pin generate friction on the body. Conversely, this can swell and damage it. Damage of this kind is not covered by warranty and cannot be replaced or repaired by us.
For better sauce yield it is always recommended to blanch the tomatoes before pureeing them. Otherwise, it is normal that parts of the tomatoes may remain attached to their skins. With uncooked tomatoes, it is normal to have to pass the skins a second time (it is advisable to use a little of the puree already produced in order to allow the tomato residue to flow more smoothly).
Differences between engine wattage and engine HP horsepower
The power of REBER motors is typically expressed in watts. The wattage of the motors generally indicates the amount of power in Watts that the motor absorbs from the electrical system. Multiplying this instant value by the hours gives the current absorption in Watts/hour.
Conversely, the expression of power in HP, i.e. motor horsepower, indicates how much power motors are able to transform into work. The greater the power absorbed from the mains into work, the greater the motor's power. In fact, many motors, while absorbing a lot of power from the mains, are not very powerful. This is because they absorb energy but do not transform it into work, but rather disperse it, typically in heat and internal rotor rotation useless for the application they are designed for.
REBER No.3 motors have a 4-pole electrical winding and make half the revolutions per minute (2800) of many competitors. This means that, for the same amount of current absorbed (400 watts), the REBER motor performs better. In fact, it transforms more energy into work, dispersing less of it in heat.
Plastic body
The body of the REBER 9008NE is made entirely of acetal resin and not of cast iron. Cast iron, of course, withstands the strain much better. To get an electric tomato press model of the same power and size but with a cast-iron body, you need to buy the code 9008N.
Acetal resin inner propeller, not aluminium or cast iron
The internal propeller of REBER Electric Tomato Squeezer No. 3 HP 0.30 450 Watt 9008NE is made entirely of acetal resin, i.e. a plastic material suitable for contact with foodstuffs. In fact, this material guarantees perfect resistance to the acids typically contained in tomatoes and sauces. In contrast, materials such as cast iron and aluminium do not have these properties. They, in fact, release ferrous substances to the sauces. For this reason, it is important not to buy substandard products or products that do not also have these properties.
Accessories made entirely of moplen
The other accessories of the REBER ARTUS 9008NE tomato squeezer are entirely made of moplen, except for the filter, which is made of 18/10 AISI 304 stainless steel.
Red cap and black cap on the engine: should they be changed or not?
For those who have been familiar with REBER tomato squeezer engines for some time, you will be faced with the Hamletic question: should the red motor cap be changed or not? Why is the black ventilation cap no longer included? How do I carry out the replacement that used to have to be done?
This simple question is now answered: the red cap no longer needs to be changed! And why is it no longer changed? Simply because the black plug that came with it was a plug with a breather. It had to be replaced with the red cap because the lubricated oil contained in the flange and greasing the gears tended to expand and produce small amounts of fumes. This, in the past, created an increase in pressure inside the engine and could create problems.
Well, today all these problems are gone because theREBER engine gear lubricating oil has been replaced with an oil that no longer produces these problems. Therefore, the red cap that only served to close the flange and prevent oil from escaping during transport no longer needs to be replaced!
Accessories applicable to REBER ARTUS Electric Tomatoes Squeezer 450 Watt 9008NE
The REBER ARTUS Electric tomato squeezer No.3 HP 0.30 450 Watt plastic accessories 9008NE is a No.3 flange product. Therefore it can apply all No.3 accessories in the REBER assortment.
- Grater No. 3 optional
- Pasta press no. 3 optional
- Kneader No. 3 optional
- Optional vegetable slicer grater No. 3
- Juice extractor no. 3 optional
With regard to the meat grinder, accessories n.5-8 have this type of flange, all of which are compatible with the motor mounted on this juicer. In the REBER range, the No.5 meat grinder has an aluminium or cast iron body and plastic plate; the No.8 meat grinder has a stainless steel body and propeller and a stainless steel plate.
Attention!!! Do not confuse grinder accessory No. 5 with flange No. 5 of the larger REBER motors! The numbering is the same but the products are completely different.
REBER product information
REBER is a leader in Italy and abroad in the production and distribution of articles for the home and for professionals. In fact, its articles are specifically designed to have highly reliable products in the home or workshop, designed to last a long time.
Furthermore, all motors and accessories always comply with all applicable regulations, both in terms of manufacturing technology and for food contact with materials.
In fact, all REBER items are accompanied by a declaration of conformity. Therefore, they always guarantee maximum satisfaction for all users!
Warranty
The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.
To facilitate the exercise of this right, the manufacturer provides authorised Technical Assistance Centres throughout the country.
Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.
In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.
Delivery time
This product is always available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 2 working days from the date of purchase.
In addition, all shipments from ElettroWebStore are free of freight charges!
Accepted payment methods
On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).
All payments are handled through the Paypal. Furthermore, even if you do not have Paypal, you can still pay without registering and storing your credentials. All you have to do is enter your details in the Paypal pages.
In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!
Our site uses HTTPS protocols, which guarantee high security standards for users!