REBER professional stainless steel kneading machine 1.6 kg 400 Watt 10208NBT

REBER professional stainless steel kneading machine 1.6 kg 400 Watt 10208NBT

REBER professional stainless steel kneading machine 1.6 kg 400 Watt 10208NBT equipped with a low-voltage board is a new mixer manufactured in Italy with a excellent value for money. The machine is equipped with a powerful 400 watt motor (0.30 HP) in continuous induction operation, suitable for being put under stress. In addition, it is fully enclosed in stainless steelto ensure optimal sealing of the internal mechanical parts while guaranteeing cleanliness.

La dough capacity is 1.6 kg for each work session, obtainable in just three minutes! This quantity makes it much easier to use the machine, because it is the average quantity used in the home or small business for frequently made doughs.

The quality of the materials and the ease of disassembly and cleaning make this product very practical and easy to use.

Visit the manufacturer's site for further information.

 

This machine, compared to the model 10208N, is equipped with a professional double switch with low voltage board. This is the version to purchase for professional use in controlled environments.

Technical specifications

Below are the main technical characteristics of the kneading machine for domestic use REBER 10208NBT:

• mixed transmission system, axial in oil bath and bevel gear with metal gears
• 400 W continuous duty induction motor, providing excellent performance at full load
• stainless steel casing for easy cleaning and guaranteed healthiness in contact with foodstuffs
• high-strength AISI 316 stainless steel kneading arm
• safety switch that stops the kneading arm when the cover is opened, to prevent contact with the mixer whips if the top cover is opened
• kneading trough made of food-grade plastic, easy to clean and very durable
• lid with slits for ingredient introduction
• easy to dismantle for cleaning as it consists of only a few parts
• suitable for all types of dough: bread, pizza, cakes, pasta
• low voltage card for use in professional environments

 

Product installation REBER professional stainless steel mixer 1.6 kg 400 Watt 10208NBT

Install the product on a flat surface that takes the dimensions of the appliance into account. In addition, the surface must be level, smooth, dry, sturdy, and approx. 80 cm above the ground, and with sufficient space around it for operation and maintenance.

For its operation, the device must be connected to a power outlet that remains permanently easily accessible during use.

Standard environmental conditions of use are a minimum temperature of +10° and a maximum of + 38°, minimum humidity 30% and maximum humidity 80%.

 

Dough dosages

L'dough type suitable for extruding spaghetti, macaroni and other types of pasta consists of:

• 1,000 g type 0 or 00 flour
• 430 g liquid consisting of water and/or eggs in a mixture that varies according to local tastes and traditions (dough with eggs only tends to make the mixture very compact and suitable for drawing with the REBER pasta press).

L'dough type for bread or pizza dough consists of:

• 1,000 g type 0 or 00 flour
• 580 g liquid consisting of water and/or milk and/or oil and yeast in a mixture that varies according to local tastes and traditions.

L'type of dough for shortcrust pastry and/or biscuits consists of:

• 500 g 00-type flour
• 250 g butter at room temperature
• 250 g caster sugar
• 1 whole egg and 2 yolks

 

Dosing of liquids and dough

The amount of liquid and weight of the dough can vary depending on the residual moisture content of the flour and the type of flour used. Whole-wheat and/or different cereal flours have a lower cohesive capacity than refined wheat flour, so the dough with these flours will always be more clumped and less compact than a dough with refined flours.

Therefore, it is advisable to reduce the total weight of the dough in order not to damage the machine.

Excessive amounts of liquid cause the dough to stick to the kneading arm and vessel.

 

Instructions for use

REBER stainless steel kneading machine 1.6 kg 400 Watt 10208N is a powerful machine with continuous operation. For this reason, we recommend following these simple instructions when using it.

The machine is delivered fully assembled and ready to use. The bevel gear of the kneader is lubricated with special Long Life grease, so it is not subject to wear and tear and should never be changed or added to.

To use the machine:

1. Turn the cover anti-clockwise and remove it from its housing;
2. fill the container according to the recommended dosage and method;
3. insert flour first and then liquids
4. place the cover on the appropriate slots (the cover has only one possible position for correct attachment and it must be rotated until the correct slot is reached) and turn it clockwise as far as it will go to allow the machine to start;
5. start the machine by pressing the engine start switch
6. During work, if necessary, liquid or flour can be added via the slits in the lid without stopping the machine;
7. after about 2.5 to 3 minutes, check that the dough obtained has the desired consistency and then switch off the machine, turn anti-clockwise and remove the lid and take out the dough.

If the recommended doses have been followed, the dough must detach easily from the kneading arm and the container must be clean and free of flour residues.

 

Once the kneading work is finished

The resulting mixture can be reshaped by hand for the preparation of bread or other sweet or savoury bakery products, or it can be chopped up and used for extruding with the Pasta Press adaptable to the mixer's gear motor.

When finished, turn the kneading arm anti-clockwise and remove it from the vessel, turn the vessel anti-clockwise to remove it from the stand, wash and dry thoroughly all components that have come into contact with the dough.

It is advisable not to turn the cover all the way down when storing the machine in order not to risk damaging the safety switch.

The machine can also be used with other optional accessories. For this reason, it is equipped with starter key for optional accessories. It is used if one of the optional accessories applicable to the gearmotor is to be fitted in place of the kneader, to allow the motor itself to start.

Download the product instruction manual

 

Cleaning and Maintenance

The lid and container are made of food-contact plastic and can be washed in a dishwasher. Overly aggressive detergents and high temperatures can damage the aesthetics of the product without affecting its technical characteristics.

Furthermore, the kneading arm is made of cast AISI 316 steel and can be washed in a dishwasher, bearing in mind that overly aggressive detergents and high temperatures can damage the product's aesthetics without altering its technical characteristics.

When you have finished working and using the machine, unplug it from the power socket and put it away.

In compliance with hygiene regulations, all parts that come into contact with foodstuffs are totally and easily removable with the spanner provided, so that they can be easily cleaned. In addition, the demountable parts that come into contact with food are isolated from the electrical apparatus.

After each use, wash with warm water and mild detergents and dry thoroughly.

Do not use water jets on the electric motor and do not use brushes, which could deteriorate the surfaces of the machine cover.

Clean the motor cover with a damp cloth using mild detergents to avoid damaging the surfaces. In any case, do not wash the electric motor or immerse it in liquid solutions.

 

Reference Standards

This product has been designed to meet the standards and directives in force in the European community in relation to the CE marking of products and in particular to

• EU Directives 2014/35/EU (Low Voltage),
• 2014/30/EU (EMC)
• 2011/65/EU (ROHS)

 

REBER product information

REBER is a leader in Italy and abroad in the production and distribution of articles for the home and for professionals. In fact, its articles are specifically designed to have highly reliable products in the home or workshop, designed to last a long time.

Furthermore, all motors and accessories always comply with all applicable regulations, both in terms of manufacturing technology and for food contact with materials.

In fact, all REBER items are accompanied by a declaration of conformity. Therefore, they always guarantee maximum satisfaction for all users!

 

Warranty

The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.

To facilitate the exercise of this right, the manufacturer provides authorised Technical Assistance Centres throughout the country.

Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.

In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.

 

Delivery time

This product is always available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 2 working days from the date of purchase.

In addition, all shipments from ElettroWebStore are free of freight charges!

 

Accepted payment methods

On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).

 

All payments are handled through the Paypal. Furthermore, even if you do not have Paypal, you can still pay without registering and storing your credentials. All you have to do is enter your details in the Paypal pages.

In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!

Our site uses HTTPS protocols, which guarantee high security standards for users!