Reber Salvaspesa 9342NR vacuum food machine RED/SATIN

Reber Salvaspesa 9342NR vacuum food machine RED/SATIN

The Reber Salvaspesa vacuum machine code 9342NR RED/SATIN is a good quality and economical solution for sous-vide food preservation. It allows food to be vacuum-packed with good power and a high vacuum level.

The Reber Salvaspesa 9342 NR domestic vacuum packing machine is equipped with a 32 cm welding barwhich allows the use of vacuum bags up to 30 cm wide. The device for sucking air from the bags is equipped with suction pump with a capacity of up to 18 litres per minute. In addition, the vacuum obtained in the vacuum chamber reaches 830 millibars. Thanks to the internal electronic board, the operation can be automatic but also set in manual mode. The Reber Salvaspesa domestic vacuum packing machine is also available in white colouring.

All components of the Reber Salvaspesa vacuum packaging machine are designed and manufactured in Italy, with manual assembly.

Salvaspesa shares several elements with the Reber Family 9700N. Although it is cheaper, it has the same performance in terms of power and air intake. Moreover, the sealing bar is the same. However, it lacks the professional vacuum gauge, the electro-mechanical buttons and the solenoid valve for lid release. Overall, the machine is smaller and has a different shape.

Technical specifications

Below are the main technical features of the ReberSalvaspesa white automatic vacuum packaging machine 9342NR:

• Manual valve for opening the lid
• Automatic operation with the possibility of manual operation
• Programmable welding
• Energy-saving system
• Continuous operation without the need for cooling stops
• Vacuum level: -830 mbar
• Suction capacity: 18 l/min.
• Maximum power consumption: 195 W
• Sealing bar length: 32 cm
• Air intake for vacuum in containers
• Vacuum accessory for vacuum in valved containers included in the package
• Extended food storage times of up to 4-5 times compared to traditional storage
• Colour: RED/SATIN

 

Description of Reber Salvaspesa 9342NR vacuum food machine RED/SATIN

Reber Salvaspesa 9342NR food vacuum machine RED/SATIN is ideal for extending food storage time in the family. In fact, it is equipped with a solid white rigid plastic frame that enhances its strength and design. In this way, its durability is preserved. In addition, compared to the Family, è more compact and takes up less space!

The Salvaspesa vacuum system is easy to use. Simply place the end of the embossed vacuum bag inside the suction chamber, bordered by the black seals when the lid is open. Then you close the lid over the bag, exerting light pressure on it with your hand. The start button is then pressed and the machine starts automatically.

Compared to the vacuum machine Family 9700N, the 9340N Sinker is not equipped with a solenoid valve. Therefore, it is advisable to exert more pressure (without exaggerating, though!) on the lid at the start of the intake. At the end, to release the lid, the black vent valve must be moved, letting the air in. This is easily achieved by moving the grommet to one side and then to the other.

The Reber Salvaspesa 9342NR vacuum food machine RED/SATIN is equipped with electronic board which allows the welding power to be adjusted. In fact, the welder can be set from a 'less powerful' to a 'more powerful' level. The choice is made on the basis of the thickness of the bags used. Further instructions on how to adjust the sealing power of Reber's Salvaspesa can be found in the instructions in the packaging.

 

REBER vacuum bags and pouches

The main formats of REBER brand vacuum bags. ElettroWebStore gives you the opportunity to purchase REBER food-grade certified vacuum bags on the appropriate page. Follow the link and buy safely from our site.

 

Operation of the Salvaspesa by Reber automatic vacuum machine

Immediately the machine will start to suck the air out of the bag. The progress of the operation can be seen on the display, which has three progression LEDs. The machine is not equipped with a vacuum gauge. This machine is equipped with a powerful -830 millibar vacuum pumpcapable of sucking in as much as 18 litres per minute.

At the end of the vacuum cycle, the machine will automatically seal the inserted vacuum bag. It will then be necessary to operate the black rubber valve to push air back into the vacuum chamber and allow the lid to reopen.

This model is also equipped with electronic board which allows the welding power to be adjusted. This is adjustable from a 'less powerful' to a 'more powerful' level. The choice is made on the basis of the thickness of the bags used by following the instructions in the instruction booklet in the package.

As a result, the reduction in welding power speeds up the vacuum and suction cycle. This allows you to work for longer.

Finally, the user can choose to use the Salvaspesa also in manual modefollowing a simple key configuration in the instruction manual.

 

Advantages of using the REBER Salvaspesa automatic vacuum packing machine 9342NR manually

The REBER Salvaspesa automatic vacuum packing machine 9342NR is programmed at the factory to be used in automatic mode. Nevertheless, it can be reset for semi-automatic operation. Semi-automatic operation means that the machine automatically starts the vacuum phase. To weld, the operator must press and hold the welding button for 4-5 seconds. Releasing the button will stop the machine and allow it to be opened.

But is it better to use the vacuum machine in manual mode? The answer is YES, in certain situations. These are situations in which the contents of the bag must be preserved from crushing or when the food placed inside is particularly tender or rich in liquids. In these cases, the operator can assess the progress of the procedure 'on sight', deciding when to terminate the cycle and seal.

In addition, another case where it may be useful to use the manual procedure is when using particularly thick bags, such as those in the iVacuum line. In this case, the increased thickness of the vacuum bag may require manual adjustment of suction and sealing, so as not to reprogram the electronic board.

 

How to use vacuum rolls?

They must first be welded on one side and then used as if they were a bag. The most practical are the Royal Pack vacuum rollsavailable in various sizes (15 cm, 20 cm and 30 cm openings and 6 m length).

In this case, you must first insert the end of the roll to be sealed into the Salvaspesa vacuum sealer, close the lid, and take care to position the end to be sealed firmly on the sealing bar. At this point, press the button with the electrical resistance symbol to start the machine in sealing-only mode.

After a few seconds, one end of the roll will be sealed and can be used as a real pre-formed vacuum bag.

 

Can the circuit board lose its factory programming configuration?

This situation can occur when the machine is not used for long periods or, more often, when the two electromechanical buttons green and red are pressed simultaneously in a certain sequence by accident.

Should this happen, don't worry. To restore the factory configuration (or manual configuration, if you prefer), simply follow the simple procedures in the user manual provided. If you no longer have the user manual, you can download it directly from here.

 

Can the sealing bar lose its effectiveness over time?

Yes, this can happen when the machine is used for a long time. It is a natural situation, as the sealing bar is equipped with an electrical resistance that heats up at high temperatures. Over time, it can therefore lose its effectiveness.

There are two very practical solutions that can be implemented in the event that the supplied sealing bar no longer works properly. The first is to reprogramming the machine's electronic board with a longer welding time. In fact, if the sealing bar loses impact (it is wearing out but is still partially functional), extending the sealing cycle time can still achieve good results for a while longer. Before extending the welding cycle time of the vacuum machine, we always recommend resetting the machine to the factory setting. This is because even the welding times could over time be accidentally 'unprogrammed'. Therefore, it is often sufficient to restore the machine to factory conditions in order to use it again.

The second possibility is purchase a new sealing bar. ElettroWebStore has all the parts you need to service your Reber vacuum machine. You can, therefore, buy both the sealing bar, the vacuum chamber gaskets (the grey anthracite ones), and the gasket for the pre-bar profile (the light grey one on the lid). Over time, these also tend to wear out and should be replaced. In case you cannot easily find these components, contact us!

 

Instructions for use of REBER Salvaspendesa automatic vacuum machine 9342NR

The 9342NR automatic household vacuum packing machine is extremely powerful. To use it, follow these simple instructions:

• place the food in the bag, leaving at least 7-10 centimetres of empty space between the opening and the food
• place the open part of the bag in the vacuum chamber, marked by the black seals
• close the vacuum chamber by dropping the lid of the Salvaspesa 9342NR vacuum machine onto the bag
• Operate the machine with the green button (in case of manual operation, press and hold the button)
• exert slight pressure, especially at an early stage, on the lid of the 9342NR vacuum sealer
• wait for the machine to finish the suction and welding process
• do not force the lid to reopen. The Salvaspesa 9342NR vacuum packing machine is equipped with a black manual valve for releasing the lid at the end of the vacuum and sealing cycle. Simply operate the black release valve with your finger: pull upwards and air will re-enter the vacuum chamber and the lid will re-open by itself
• In the case of using a very large and long bag and, more generally, to facilitate the vacuuming of the machine, as soon as the vacuum procedure has started it may be useful to raise the bottom of the bag a few centimetres. In this way, by aligning it with the level of the machine, the vacuum process will be smoother.

 

The Reber brand

Reber S.r.l.  is a leader in Italy and abroad in the production and distribution of articles for the home and for professionals. In fact, its articles are specifically designed to have highly reliable products in the home or in one's own small workshop, designed to last a long time.

Furthermore, all motors and accessories always comply with all applicable regulations, both in terms of manufacturing technology and for food contact with materials.

In fact, all Reber items are accompanied by a declaration of conformity. That is why they always guarantee maximum satisfaction for all users!

 

Warranty

The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.

You can extend the product's legal warranty period by purchasing one of our extended warranty packages!

To facilitate the exercise of this right, the Producer makes available to the Authorised Service Centres throughout the country.

Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.

In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.

 

Delivery time

This product is always available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 10 working days from the date of purchase.

In addition, all shipments from ElettroWebStore are free of freight charges!

 

Accepted payment methods

On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).

To check all accepted payment methods, please visit our page on payment methods on the ElettroWebStore site. In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!

Our site uses HTTPS protocols, which guarantee high security standards for users!