REBER Electric Tomato Squeezer No. 3 energy saving 150 Watt 10900N

Reber electric tomato squeezer No. 3 energy-saving 150 Watt 10900N

Reber electric tomatoes squeezer No. 3 energy saving 150 Watt 10900N is a REBER electric tomatoes squeezer with a new generation motor. It absorbs only 150 Watts but does the same work as a 9008N tomato squeezer with a 450 Watt HP 0.30 motor. The motor is stainless steel shrouded and the accessories are stainless steel: maximum cleanliness, hygiene and design.

Funnel and chute are stainless steel, cast iron body painted with epoxy paint suitable for food contact. Stainless steel cased motor. The propeller is made of acetal resin suitable for contact with foodstuffs. The size is that of a No. 3 tomato press. The motor is energy-saving because it only draws current when under load. Conversely, when operating with no load, it consumes the minimum amount of current needed to turn and stay on. In this way, it does not produce excess heat

What do you mean that the tomato squeezer 10900N has similar performance to the tomato squeezer 9008N?

Lo tomato squeezer 9008N is a product specifically for tomato puree, with a motor that draws 450 watts continuously from the electrical system and generates a maximum output power of 0.30 HP. This tomato puree machine is equipped with a finned motor, i.e. not covered by a fairing, plastic fan cover and is not energy-saving. This means that it always draws the same amount of energy, whether it is running empty or at full load. If it runs idle, it tends to spoil more, because the energy absorbed is not converted into work but inevitably into heat.

In contrast, the 10900N tomato processor can perform the same squeezing (but also meat mincing and grating) functions as the motor associated with the 9008N, but with the benefit of consuming much less! In fact, it only draws current from the system when put under stress. Therefore, the consumption figure of 150 Watts is indicative and refers to average use.

In addition, Reber electric tomato squeezer No. 3 energy saving 150 Watt 10900N has the motor covered by the stainless steel casing! This makes the product much easier to clean and much more hygienic, because stainless steel stains less and is easier to clean. In addition, the design is better and the product has no plastic weak points (unlike the back cover of the 9008N which covers the cooling fan.

 

Technical characteristics of the Reber electric tomato squeezer No. 3 energy-saving 150 Watt 10900N

Below are the main technical characteristics of the REBER Electric Tomato Squeezer No. 3 energy saving 150 Watt 10900N

• Stainless steel shrouded motor without fan cover
• Energy-saving electric motor with a power consumption of only 150 watts
• Engine power: approx. 0.30 HP
• The engine is equipped with a forward gear only.
• Weight: approx. 7.5 kg
• Filter cone, drip tray, splash guard, large capacity funnel made entirely of AISI 304 stainless steel
• Cast iron body painted on the inside with epoxy powder paint baked at 300 °C, suitable for food contact
• High-strength acetal resin propeller (over 220°), specific for food contact
• Steel and nylon 6.6 tow pin
• Applicable accessories on request: grater, meat grinder, juice extractor, vegetable slicer
• Article certified for food use that fully complies with Italian and European regulations on household appliances

Description

REBER Electric Tomato Squeezer No. 3 energy saving 150 Watt 10900N is a high quality and powerful tomato squeezer.

In fact, it consists of a 150 watt motor that generates 0.30 horsepower. The main feature of this product, apart from being constructed with attention to detail and overall design, is the fact that it is designed to save energy during occasional workloads.

In addition to being used as a tomato press, this product can also easily be used to make jam. In this case, it may be useful to purchase filter cones with smaller or larger holes than the one supplied (depending on the type of recipe to be made).

All types of mincing accessories applicable on REBER motors are available in the ElettroWebStore!

Accessories applicable to Reber electric tomato squeezer No. 3 energy-saving 150 Watt 10900N

The Reber electric tomato squeezer No. 3 energy-saving 150 Watt 10900N is a No. 5 flange product. Consequently, it can apply all No. 5 accessories in the REBER range.

• Grater No. 3 optional
• Juice extractor
• Vegetable slicer
• Meat mincer No. 5 aluminium and plastic optional

This model of tomato squeezer cannot apply the pasta press accessory nor the kneader accessory. In fact, although the flanges are compatible with pasta press accessory no.3 and kneading machine accessory no.3, this model has a motor operation that does not guarantee exceptional performance with these accessories. Therefore, they can only be used if and only if the user foresees occasional and not continuous use of such accessories and if the dough produced has a high moisture content.

REBER product information

REBER is a leader in Italy and abroad in the production and distribution of articles for the home and for professionals. In fact, its articles are specifically designed to have highly reliable products in the home or workshop, designed to last a long time.

Furthermore, all motors and accessories always comply with all applicable regulations, both in terms of manufacturing technology and for food contact with materials.

In fact, all REBER items are accompanied by a declaration of conformity. Therefore, they always guarantee maximum satisfaction for all users!

 

Warranty

The product is covered by legal guaranteeaccording to the relevant page on our website, which we invite you to read. We also provide clear information on the exercise of the right of withdrawal.

To facilitate the exercise of this right, the manufacturer provides authorised Technical Assistance Centres throughout the country.

Further information on the relevant legislation can be found on the website of theCompetition and Market Authority.

In order to improve product quality, the manufacturer reserves the right to change the materials and technical characteristics of the article without prior notice. Furthermore, the descriptions and images given here are therefore indicative and may vary slightly from the final product.

 

Delivery time

This product is available for immediate delivery. In fact, it can be ordered immediately and is shipped by ElettroWebStore within 2 working days from the date of purchase.

In addition, all shipments from ElettroWebStore are free of freight charges!

 

Accepted payment methods

On the ElettroWebStore website you can pay with all popular methodsboth Internet-specific (such as prepaid cards) and traditional (such as classic credit cards).

 

All payments are handled through the Paypal. Furthermore, even if you do not have Paypal, you can still pay without registering and storing your credentials. All you have to do is enter your details in the Paypal pages.

In no case ElettroWebStore manage your payment card data or become aware of them. In fact ElettroWebStore will only see if payment has been made or not!

Our site uses HTTPS protocols, which guarantee high security standards for users!